Skip to the tester
PadTester

Gamepad Tester

Plug in or pair your controller and press any button. Check every button, stick and trigger, then run the drift, circularity, vibration and polling-rate tests. Everything runs in your browser.

LT 0%RT 0%LBRBShare+0.00 +0.00+0.00 +0.00ABXYViewMenuHome

Connect a controller and press any button

USB cable or Bluetooth. For privacy, browsers only reveal a controller after you press one of its buttons.

Not connected

What this tester checks

  • Buttons and triggers: every press lights up and is counted, so a button that double-registers or sticks is easy to spot. Analog triggers show 0–100 %.
  • Sticks: the drawing moves with your thumbs and the raw axis values are shown to four decimals.
  • Stick drift test: 5 seconds hands-off, then a grade, the direction of the drift and the deadzone that hides it.
  • Circularity: spin each stick and see how round its range is.
  • Vibration: light motor, heavy motor, both, a pulse pattern and trigger rumble where supported.
  • Polling rate: how many input updates per second actually reach the browser.
  • Up to four controllers at once: switch between Player 1–4 at the top of the tester.

How to test your controller

  1. Connect the controller with a USB data cable or pair it over Bluetooth in your system settings.
  2. Open this page and press any button. Browsers hide controllers until a button is pressed, which protects your privacy.
  3. Press every button once and move both sticks to their edges. Each press should light up exactly once.
  4. Open the Drift test tab, put the controller down and let it record for 5 seconds.
  5. Try Circularity, Vibration and Polling rate if you want the full picture.

How to read the results

MeasureHealthyWorth a look
Drift, worst resting offsetUp to 10 %Above 10 %, repair above 20 %
Circularity, average errorUnder 15 %Above 15 % or a very lopsided shape
TriggersReach 100 % and return to 0 %Stops short of 100 % or never returns to 0 %
ButtonsOne count per pressTwo counts per press, or lit without touching

These ranges are guides, not hard rules. Most games apply a deadzone of 10 % or more, so a stick that rests at 3 % off-centre is normal and won't affect play.

Works with almost any controller

Any controller your computer or phone recognises will show up here. We have notes for the most common ones: PS5 DualSense, PS4 DualShock 4, PS3, Xbox Series and Xbox One, Switch Pro, 8BitDo and generic USB pads.

Chrome and Edge give the most complete results. Firefox and Safari work for buttons and sticks but have gaps, mostly around vibration. The browser support page has the details.

What a web page cannot test

Browsers only pass on buttons, sticks, triggers and basic rumble. Motion sensors, touchpad finger position, battery level, adaptive trigger resistance, the speaker, the microphone and the headset jack are not available to any website. A site that claims to test those is guessing.

Frequently asked questions

Is this gamepad tester safe? Does it install anything?

Nothing is installed or uploaded. The page reads your controller through the browser's built-in Gamepad API, the same one browser games use, and the readings never leave your device.

Why doesn't my controller show up?

Press a button first: browsers only reveal a controller after a press. If it still doesn't appear, try another USB cable (many are charge-only), re-pair it over Bluetooth, close apps that grab the controller such as Steam or DS4Windows, or try Chrome. More fixes are on the browser support page.

Why don't my sticks rest at exactly 0?

The browser shows raw values with no deadzone. Almost every stick rests a little off-centre. It only matters when the offset is large or keeps growing; the drift test tells you which.

Can this site fix stick drift?

No website can change your controller's hardware. It can measure the drift and tell you which deadzone hides it. Our drift fix guide covers calibration, cleaning and repair.

Does it work on a phone or tablet?

Yes. Pair the controller with your Android phone or iPhone first, open this page and press a button. Chrome on Android and Safari on iPhone both support controllers.

More tests

Updated: 2026-11-21