Skip to the tester
PadTester

PS3 Controller Tester

Connect your DualShock 3 with a mini-USB cable and press the PS button. Once your system recognises it, every button and stick shows up here.

L2 0%R2 0%L1R1+0.00 +0.00+0.00 +0.00CreateOptionsHome

Connect a controller and press any button

USB cable or Bluetooth. For privacy, browsers only reveal a controller after you press one of its buttons.

Not connected

Getting a PS3 controller recognised

  • Windows doesn't support the DualShock 3 out of the box. It needs a third-party driver before any app or browser can see it. Only install drivers from a source you trust.
  • Linux recognises it over USB and, with some setup, over Bluetooth.
  • macOS support depends on the version; a USB connection is the most reliable.
  • Android: some phones accept it over a USB OTG adapter.
  • Press the PS button after plugging in; the controller stays idle until you do.

What the tester shows

When the browser knows the controller, you get the standard layout: four face buttons, L1/R1, L2/R2 as analog triggers, Select, Start, the stick clicks and the D-pad. If the browser shows a non-standard layout, use the raw button and axis numbers; they're always accurate.

The DualShock 3 has pressure-sensitive face buttons, but browsers report them as simple on/off. Motion sensing (Sixaxis) isn't available to websites.

Common PS3 controller problems

  • Drift and worn sticks on old controllers. The drift test shows how bad it is.
  • Weak battery: if the controller turns off quickly over Bluetooth, test it over USB.
  • Copies: many “PS3 controllers” sold today are third-party copies with different chips. They often show a different name and a non-standard layout.

Frequently asked questions

Why doesn't my PS3 controller appear on Windows?

Windows has no built-in driver for it. Until a driver is installed, no browser or game can see it.

Does the tester show button pressure?

No. Browsers expose the DualShock 3 face buttons as on/off only.

Can I test it over Bluetooth?

Only once your system has paired it, which usually needs extra setup. USB is the easiest way to test.

More tests

Updated: 2026-11-21