How the drift test works
While you keep your hands off, the tester records where both sticks rest, once per screen refresh, for 5 seconds. That is usually 300 readings per stick or more.
From those readings it works out the average offset (how far from the centre the stick sits), the worst offset (the furthest it wandered), the shake (how much it jitters) and the direction it pulls. The grade is based on the worst offset, because that is what makes a character walk on its own.
The suggested deadzone is the worst offset plus a small safety margin. Set your game's deadzone to at least this value and the drift will no longer reach the game.
What the grades mean
| Grade | Worst offset | What to do |
|---|---|---|
| Excellent | 0–4 % | Nothing. The stick is healthy. |
| Good | 4–10 % | Nothing for most games. Their default deadzone already hides it. |
| Worn | 10–20 % | Raise the in-game deadzone, then try cleaning. See the fix guide. |
| Needs repair | Over 20 % | Cleaning sometimes helps. Usually the stick module is worn and needs replacing. |
Why a healthy stick is not exactly zero
Consoles and games quietly apply a deadzone. The browser does not, so you see the raw signal. Most new controllers rest within 1–5 % of the centre. Some brand-new controllers sit a little further out and that is still normal.
What matters is whether the value is stable and small. A stick that rests at 3 % every time is fine. One that rests at 3 % today and 12 % next month is wearing out, so it's worth saving a result to compare later.
Check a repair with before and after
- Run the test and press Save as “before”. The result is stored only in this browser.
- Clean, recalibrate or repair the stick.
- Run the test again. Each stick now shows the old and the new worst offset side by side.
Drift, deadzone and circularity are different things
- Drift is movement when you're not touching the stick. This test measures it.
- Deadzone is the area around the centre that a game ignores. It hides drift, but a large one makes small aim adjustments feel sluggish.
- Circularity is the shape of the stick's outer range. A stick can have no drift and still be uneven at the edges. Check it with the circularity test.
Frequently asked questions
Should I hold the controller during the test?
No. Put it on a flat surface and let go of both sticks. Holding it adds tiny movements from your thumbs and makes the result look worse than it is.
Why does my result change a little between runs?
Small changes of 1–2 % are normal: the stick settles slightly differently each time it springs back. Run the test three times and look at the worst result.
What deadzone should I set in my game?
Use the suggested deadzone from the result, or slightly higher. Many games call it “inner deadzone” or “stick sensitivity threshold”. Only raise it as much as needed; a high deadzone makes small aim movements harder.
Do Hall effect sticks drift?
Hall effect and TMR sticks read position with magnets, so they don't wear the way normal potentiometer sticks do. They can still rest slightly off-centre, but drift that grows over the years is rare.
More tests
Updated: 2026-11-21